Designing
the Future of Sound.

Embrace your
acoustic comfort.

A true piece of acoustic artwork

A true piece of acoustic artwork.

Bowers & Wilkins Headquarters

Sahara - Bass Trap Corner

Absorption coefficient | 1/3 Oct. from 32Hz to 160Hz | 1 Oct. from 250Hz to 8 KHz |
Performance

58Hz to 66 Hz / 67Hz to 69 Hz / 70Hz to 73 Hz / 74Hz to 77 Hz / 78Hz to 82 Hz

Features

Type:
TPDA - Artnovion technology
Tuneable Pistonic Diaphragmatic Absorber

Tuneable absorption range:
- 58Hz to 82Hz.
- Hz-by-Hz fine tuning
- High Efficiency Bass Trap

Purpose
- Room mode control
- Bass ratio control
- Low frequency RT reduction
- Improving low frequency response
- Reducing low frequency time decay
 
The Corner bass trap is the latest in low frequency absorption. This elegant panel integrates a tuneable membrane over a sealed volume, containing a high performance acoustic core. A secondary posterior compartment positions a high density velocity core in the high pressure zone of the room. The panel is completely tuneable, by means of an adjustable weighted membrane, allowing to pinpoint the performance of the panel to a target frequency.

The panels' tuneable membrane works similarly to a speaker cone, allowing for much superior - and controlled - performance. A central mass is supported by an elastic membrane - This mass can then be altered to change the resonant frequency of the membrane, stepping the peak performance of the Trap from 58 to 82 Hz.
TPDA - Artnovion technology

The very best performance with the best design.

Recommended for
- Hi-Fi Listening Room
- Media Room
- Home Cinema
- Living Room
 
 
 
The front of the panels clips into the bass trap body, leaving easy access to the membrane.

The design of these acoustic cores creates a trap with unprecedented performance and unique calibration – Absorbing more - and from a lower frequency - than anything else on the market.

The Corner Bass Trap will be available in all standard panel fronts – following the lines of the previous HP range. The front of the panels clips in to the bass trap body, leaving easy access to the membrane. The panel is installed on wall corners, with a simple cleat system.

Making the most of our new membrane technology employed in the Sub Trap range.

The new membrane brings new fine-tuning possibilities and even more performance than before. It has been redesigned, forgoing the rounded sides to include a new dedicated sealed-cavity Helmholtz resonator at the back – and also elegantly hiding its cleat fixing system.

For more information on TPDA technology, check out our white paper below.

Sahara design option:
- Lacquered HMDF
- Marine grade plywood structural frame
- Calibrated cell acoustic foam
- Tuneable diaphragmatic membranes (TPDA)
- High performance porous absorber core (VABT)



Integrated Fixing System

Dimensions:
Sahara - Bass Trap Corner | 595x595x163mm


Performance - Use the Corner Bass Trap performance chart to estimate the number of units required to achieve different dB reduction levels in certain room sizes.

Efficiency - For maximum efficiency, Corner Bass Trap units should always be installed in the pressure zone of the room mode you wish to treat.


For more information on TPDA technology, check out our white paper - Link

New fine-tuning possibilities. Outstanding tuneable performance

Bass Trap Corner | Hybrid

Control your room

Overview

Features
Type:
TPDA - Artnovion technology
Tuneable Pistonic Diaphragmatic Absorber

Tuneable absorption range:
58Hz to 82Hz.
Hz-by-Hz fine tuning
Purpose
- Room mode control
- Bass ratio control
- Low frequency RT reduction
- Improving low frequency response
- Reducing low frequency time decay
 
Recommended for
- Hi-Fi Listening Room
- Media Room
- Home Cinema
- Living Room
 
 
Dimensions:

FG - LW | 595x595x163mm

Fixing Systems

Sahara W - Bass Trap Corner has an integrated fixing system

Available Finishes:

(FG - LW) Lacquered Wood Finishes

Interested in this product? Contact us